
DIY Pool Screen Repair – Step-by-Step Guide & When to Call a Pro

Your pool screen enclosure keeps bugs, leaves, and debris out – but over time, screens can develop small tears, sagging, or holes. While some minor damage can be easily repaired with basic tools, larger issues may require professional rescreening. In this guide, we’ll walk you through DIY screen repairs, list the tools and materials you need, and help you decide when to call a pro.
Tools and Materials Needed for DIY Screen Repair
To patch or replace a section of your pool screen, gather these essentials:
- Replacement screen material (Fiberglass, No-See-Um, or Florida Glass)
- Screen spline (rubber cord that holds the screen in place)
- Spline roller tool (for pressing spline into the frame)
- Scissors or utility knife (for cutting the screen)
- Flathead screwdriver (for removing old spline)
- Tape measure (to cut screen to the correct size)
- Screen patch kit (for small holes and quick fixes)
Where to Buy Screen Repair Supplies
- Home Depot and Lowe’s – Good for basic fiberglass screen and spline
- Ace Hardware – Often carries specialty screens like No-See-Um
- Online (Amazon, Metro Screenworks, etc.) – More options for bulk screen material
Step-by-Step Guide to Fixing a Torn Pool Screen
1. Remove the Damaged Screen
- Use a flathead screwdriver to pry out the old spline from the frame.
- Carefully pull the damaged screen out of the enclosure track.
2. Measure and Cut the New Screen
- Lay the new screen over the opening, leaving extra room on all sides.
- Use a utility knife or scissors to cut the screen slightly larger than needed.
3. Install the Screen with New Spline
- Place the new spline over the screen and into the track.
- Use a spline roller to press it securely into the groove.
- Trim off any excess screen with a utility knife.
4. Check for a Tight Fit and Secure It
- Press around the edges to make sure the screen is snug and flat.
- If any areas feel loose or wavy, gently roll the spline tighter.
When to Call a Professional
While DIY repairs work for small tears or replacing a single panel, you should call a pro if:
- Your pool screen has multiple tears or sagging panels.
- The screen detaches from the frame repeatedly.
- There is damage to the aluminum frame or enclosure structure.
- You need Florida Glass or No-See-Um screen installed.
Need a Full Rescreen? Call Us for Expert Repair.
Hurricane season, storms, and daily wear can weaken your pool screen enclosure over time. If you notice ongoing issues, it may be time for a full rescreening or professional repair.
Call Pool Screens R Us today for a free estimate! (863) 547-4210

Offering: Pool Screen Repair, Seamless Gutters, Screen Enclosure Repairs, Lanai Screen Repair, Pool Enclosure Screen Repair, Pool Cage Painting, and more. Serving Central Florida including Orlando, Davenport, Haines City, Winter Haven, Brandon, and the surrounding area.
SERVICES
OUR SERVICE AREAS
Bartow • Brandon • Clermont • Lakeland • Lake Wales • Davenport • Haines City
Orlando • Winter Garden • Winter Haven • Winter Springs